Prints Coming Out Blank

The printer seems to be working—pages are going through—but they’re coming out completely blank. This can be caused by ink, alignment, or software glitches.

Possible Causes:

• Empty or clogged ink cartridges
• Incorrect cartridge installation
• Printhead blockages
• Outdated printer firmware
• Using the wrong paper or print settings

DIY Solutions to Try:

• Check Ink or Toner Levels
  Go to your printer’s settings to view ink status.
  Replace any low or empty cartridges.
• Run a Printhead Cleaning Cycle
  Navigate to printer maintenance > select “Clean Printhead” or “Nozzle Check.”
  Repeat the process 2–3 times if needed.
• Ensure Cartridges Are Properly Installed
  Open the printer, remove cartridges, and reinsert them until they click into place.
  Make sure there’s no protective tape left on new cartridges.
• Try a Test Page from the Printer Menu
  This helps determine if the issue is in the printer or your document/software.
  If the test page is also blank, it's likely a hardware or cartridge problem.
• Reinstall or Update Printer Driver
  A corrupt or outdated driver can miscommunicate print commands.
  Visit the printer brand’s site to get the correct version.

Tips for the Future:

• Don’t leave your printer idle for long—print a page weekly to keep ink flowing.
• Store ink cartridges upright and in a cool place.
• Use quality paper and make sure you select the correct type in settings.